If you manage a building with a lift, you will see a lift engineer arrive, put out of service signs on each floor, disappear into the lift shaft and motor room for a while, and then leave. But what actually happens during a lift service? How do you know you are getting value from your lift maintenance contract?
This guide walks you through a typical VM Elevators lift service visit from start to finish: how it is planned, what our engineers check on the car, the landings, the shaft and the machine, and how the results are recorded and reported back to you.
Why regular lift servicing matters
Firstly lets start with why a regular lift service matters in the first place. Regular lift servicing is what keeps your lift safe, reliable and compliant. A lift is a complex mechanical and electrical system with hundreds of moving parts, and each one wears with use. Routine maintenance finds signs of wear and potential issues early, before they become a lift breakdown, costly repairs or, worst of all, a trapped passenger.
The importance of lift servicing goes beyond reliability. Under the Lifting Operations and Lifting Equipment Regulations (LOLER) and PUWER, lift owners have a legal duty to keep lifts properly maintained, and neglecting lift maintenance has real consequences. A documented maintenance history from regular lift maintenance is how you show that your duty is being met.
Before the lift service visit
Each maintenance visit is part of a planned preventative maintenance schedule, so it is booked in advance at a frequency that suits your lift usage. That is anywhere from two to twelve visits a year, depending on the type of lift and how heavily it is used. Our guide on how often your lift should be serviced covers frequency in detail.
Knowing the date ahead of time lets you warn residents, tenants or staff that the lift will be briefly unavailable, and plan around deliveries or busy periods. If your building has particular access arrangements, such as a concierge, key holder, restricted hours on a hospital ward or a school timetable, we build those into the booking.
Arriving on site and making the lift safe
When our lift engineer arrives, they sign in with the building contact and ask about any reported issues since the last visit. Anything residents or staff have noticed, such as a noisy door, a rough ride or the lift stopping slightly out of level, is useful information, so it is worth passing on.
The engineer then takes the lift out of service and places out of service signs next to the lift on every floor. This is non negotiable. Our engineers need full and free access to the lift car, the lift shaft and the machine room, and safe working on lifts follows best practice set out in BS 7255. The lift is only returned to service once the visit is complete and all safety checks have passed. Safety is our number one priority at VM.
What the lift engineer checks during a lift service
The exact scope depends on the type of lift (traction, hydraulic, machine room less, platform lift and so on) and where the visit sits in the maintenance schedule. Some tasks happen on every routine maintenance visit, others rotate through the year. A typical lift service covers the following areas.
Inside the lift car
- Ride quality: starting, stopping and travel between floors should be smooth, without jolts, vibration or unusual noise
- Levelling: the car floor should stop flush with each landing, since an out of level stop is a trip hazard and often an early sign of a developing fault
- Car operating panel: every floor button, door open and close buttons, and position indicators
- Alarm and emergency communication: the alarm button and two way communication system are tested to confirm a trapped passenger can reach help (worth checking ahead of the PSTN switch-off)
- Emergency lighting and normal car lighting
- Car door operation, including the safety features that stop the doors closing on a passenger, such as the safety edge or light curtain
Lift doors at every landing
- Landing door operation, alignment and closing force
- Door locks and interlocks, which prevent a landing door opening unless the car is there
- Sill tracks, which are cleaned of grit and debris, one of the most common causes of door faults
- Landing call buttons and indicators
- Signs of damage from trolleys, bins or vandalism
The lift doors account for more faults than any other part of the lift system, which is why they get so much attention. Our guide to lift door problems explains why.
Machine room inspection
- The motor, gearbox or gearless machine, checked for noise, heat, oil leaks and wear and tear
- The brake, inspected and adjusted so the lift stops and holds correctly
- The controller and drive, checked for faults, loose connections and logged error codes
- The overspeed governor, which triggers the safety gear if the car ever travels too fast
- On hydraulic lifts: oil level, oil condition, the pump unit, valves and pipework for leaks
- The general condition of the room itself, including ventilation and temperature, since overheating motor rooms cause breakdowns in hot weather
Lift shaft and pit inspection
- Suspension ropes or belts, checked for wear, broken wires and even tension
- Guide rails and guide shoes or rollers
- Counterweight and its guides
- Top of car controls and safety switches
- Limit switches and final limits at the top and bottom of travel
- Buffers in the pit
- Pit condition: water, debris and rubbish thrown down the shaft all cause faults
- Shaft lighting
Cleaning, lubrication and adjustment
Alongside the lift inspections, the engineer carries out the routine servicing that keeps the lift running: cleaning components, lubricating moving parts, and adjusting doors, brakes and switches back into their correct settings. This is what keeps lift operation smooth and protects lift performance between visits. Consumables and lubricants used on a routine visit are included in all of our maintenance contracts.
Before the lift goes back into service
Once the work is finished, the engineer runs the lift through its full travel, tests the doors and safety devices again, and confirms the alarm is working. Only then are the out of service signs removed and the lift handed back.
If the engineer finds something that cannot be put right on the visit, such as a part that needs ordering or lift repairs that need a longer shutdown, they will make the lift safe, explain the situation to the building contact, and record it for follow up.
How we report on every lift service visit
This is the part most building managers care about, because it is the proof that the work was done and the record you need for compliance.
Work is logged digitally on site. Our engineers record the work carried out on a handheld device that uploads the information directly to our office. [sarah confirm] That means there is an accurate, time stamped record of every visit rather than a handwritten note that can go missing.
You receive a written record of the findings. Every customer receives a worksheet setting out the engineer’s findings and observations, covering what was checked, what was done and anything that needs attention. Our electronic job reports can include photos, so you can see the condition of components you would never normally get near.
Recommendations are followed up, not forgotten. Any defects or recommendations are passed to our service team for oversight. They review them, prepare quotations where repair work is needed, and schedule it, so nothing raised on a visit simply sits in a report.
Your records support your compliance. Over time, these reports build a full maintenance history. That history is what you need to show insurers and engineer surveyors at your thorough examination under LOLER that the lift has been properly maintained, and it is how you hold your contractor to account against agreed lift maintenance SLA standards.
How long does a lift service visit take?
It depends on the lift and the tasks due on that visit. A routine visit on a simple passenger lift can be completed in an hour or two, while a visit that includes periodic shaft and pit inspections, or covers several lifts or goods lifts in one building, will take longer. We will always give you an idea of expected downtime when the visit is booked so you can plan your operations around it.
Lift servicing vs LOLER inspections
The two are often confused. Lift servicing is maintenance, carried out by your lift company to keep the lift working safely. A thorough examination is an independent inspection required under Regulation 9 of LOLER, usually every six months for lifts that carry people, carried out by a competent person such as an engineer surveyor from your insurer. They are separate, but a well-maintained lift is far more likely to pass its thorough examination without defects being raised. At VM we do not conduct LOLER inspections. We focus purely on lift maintenance contracts.
Signs your lift needs attention between services
Even with scheduled maintenance visits, call your lift company if you notice:
- Doors that hesitate, bounce, reopen or close more slowly than usual
- The car stopping above or below floor level
- Grinding, squealing or banging noises
- Vibration or a rough ride
- Buttons that do not register, or flickering lights
Reporting a minor issue early is the best way to keep the lift out of the emergency repairs queue. Our guide to why lifts break down explains what these signs usually mean.
Book professional lift servicing with VM Elevators
We maintain all makes and types of lifts and escalators across London, Essex, the Home Counties and major cities across the UK, including lifts installed by other companies. Our engineers are DBS checked and uniformed, we work to LEIA standards, and every visit is recorded and reported. If your lift is ageing, we also offer lift modernisation services to restore reliability without a full new lift installation.
Every service visit is part of a lift maintenance contract, so the contract you choose decides how often we visit and what is included. If you are reviewing your current provider, our guide to comparing lift maintenance providers will help.
To arrange lift servicing or discuss a comprehensive lift maintenance contract, visit our lift maintenance services page or call 0800 448 8615. To see how service visits fit into a wider plan, read our guide to planned preventative maintenance for lifts.