Lift Door Problems: Causes, Risks and Fixes
If your lift keeps breaking down, the doors might be the place to look. Lift door problems, or elevator door problems as they are often called, are one of the most common causes of lift faults and callouts in residential blocks and commercial buildings, across passenger lifts, goods lifts and platform lifts alike. The doors open and close thousands of times a week, they take knocks from trolleys, bins and wheelchairs, and the lift is designed not to move unless every car and landing door is fully closed and locked.
That makes the door system one of the hardest working and most safety critical parts of any lift system, and an important factor in its reliability. This guide explains the common lift door problems we see, the risks they create, what lift door repair involves, and how regular maintenance helps reduce door faults.
How lift doors work: door components and door operation
Most passenger lifts have two sets of doors: the car doors, which travel with the lift, and a landing door at each floor, although configurations can vary. On many automatic lifts, when the lift arrives at a floor, a door operator on top of the car drives the car doors open, and a coupling mechanism on the car door engages the landing door and pulls it open too.
The doors hang from rollers that run along a track at the top, and are guided at the bottom by gibs sliding in a sill track. Each landing door has an interlock that keeps it locked shut unless the car is at that floor, and electrical contacts that tell the controller every door is closed and locked.
Door protection devices, often called door sensors, detect anyone in the doorway and reopen the doors before they close on them. A light curtain is an infrared sensor system that projects a series of beams across the doorway and detects people or objects without any physical contact. A mechanical safety edge is different: it is a moving strip along the leading edge of the car door that triggers the doors to reopen when it is physically pushed back by a person or object. Many lifts now use light curtains, while some older lifts use a safety edge or a combination of both.
Faults that affect the door safety circuit, such as an interlock or door contact that is not making, can prevent the lift from operating. That is by design: a lift that could move with a door open would be dangerous. Other faults, such as worn rollers or a struggling door operator, may instead cause slow, noisy or unreliable door movement while the lift stays in service.
Common lift door problems
Faulty door sensors and doors that keep reopening
Doors that repeatedly reopen or fail to close properly are a common reason for lift callouts. The usual causes are:
- Faulty door sensors, or a light curtain that is dirty, misaligned or failing, so the lift thinks something is in the doorway. Depending on the fault and the lift’s control system, a failed sensor can stop the doors closing and take the lift out of service
- Debris in the sill track stopping the doors from closing fully
- A landing door contact or interlock that is not making, so the controller never sees the door as locked
- A worn or out of adjustment door operator
Slow door operation
Doors that open or close noticeably more slowly than they used to are often a sign of a worn motor or drive belt, a worn roller, or drag in the door tracks. Slow doors can increase waiting times and reduce the lift’s efficiency at busy times, and are often an early warning of a developing fault.
Unusual noises
Scraping, grinding, banging or squealing as the doors move are rarely just a nuisance. They usually point to worn door rollers, damaged gibs, dry or dirty tracks, or loose hangers. Left alone, a minor issue like this can develop into a door that jams.
Misalignment
Doors that sit unevenly, leave a gap when closed or rub against the frame are misaligned. Misalignment is often caused by impact damage from trolleys or bins, worn hangers, or loose fixings. Even a small amount of misalignment can prevent the interlock engaging properly, in which case the lift will not run.
Doors jammed by debris
Grit, coins, keys, stones from shoes and rubbish collect in the sill tracks, especially in busy residential blocks and at ground floor entrances. Debris is one of the simplest door faults to prevent and a frequent reason for a callout.
Door operator and drive system failures
The door operator is the motor and drive system mounted on the car that powers door movement. Failed motors, stretched or snapped belts, and faulty door controllers can stop the doors moving altogether. On older lifts, this is one of the components most often upgraded during modernisation.
Damaged or failing locks and contacts
Worn interlocks, bent locking hooks and burnt contacts can cause intermittent faults: for example, the lift may run normally for a day, then stop at a particular floor. These door malfunctions can be frustrating to trace without a proper inspection.
The risks of ignoring lift door problems
Door faults are not just an inconvenience.
- Lift downtime. Depending on the fault, a door problem can take the lift out of service. In a hospital, care home or residential block, a lift breakdown can restrict access between floors, particularly for people with mobility needs.
- Entrapments. A door fault can cause an entrapment, for example if the doors fail to open at a landing, or if the lift stops between floors because a door contact has opened.
- Injury. Doors that close with too much force, or door protection devices that fail to detect someone, can strike passengers. A misaligned or damaged door may not sit flush with the frame or sill, which can create a trip hazard or leave a gap that catches feet, fingers or clothing.
- Falls into the shaft. A landing door that can be opened without the car present is a serious hazard. Damaged or tampered door locks must always be treated as urgent.
- Rising repair costs. Small door issues left unrepaired can lead to worn operators, damaged tracks, and more extensive repairs or replacement of door components.
The lift door repair process
When a lift engineer attends a door fault, the lift door repair process usually follows these steps:
- Isolate and make safe. The lift is taken out of service and signs placed on each floor.
- Inspect the door system. The engineer checks the car and landing doors, door operator, sensors, rollers, tracks, locks and contacts to find the cause, not just the symptom.
- Clean and clear. Sill tracks and guides are cleaned of debris.
- Repair or replace. Worn rollers, gibs, belts, sensors or contacts are replaced, and damaged panels or hangers repaired.
- Check and adjust. Door alignment, operation and safety devices are checked and adjusted where necessary, in line with the lift manufacturer’s requirements.
- Test. The doors are run repeatedly at every floor, and the door protection devices and relevant safety functions tested, so the lift is safe and reliable before it goes back into service.
Whether a door fault can be resolved on the first visit depends on the fault and whether parts are needed. Our engineers carry the most common spare parts, and where a part needs ordering, our in-house repairs team sources it as quickly as possible. The lift remains out of service where necessary until it is safe to return to use.
Repair or replace your lift doors?
Most door problems can be put right with repairs and adjustment. If door faults are one of several signs your lift needs refurbishment, it may be time to look at the lift as a whole. Replacing the operator, or upgrading the door equipment across the whole lift, is worth considering when:
- Door faults are recurring despite repairs
- Parts for the existing door operator are obsolete or slow to source
- The doors have been badly damaged
- You want faster, quieter and more reliable door operation, or better detection with a modern light curtain
Door equipment upgrades are often part of a wider lift modernisation, which may help extend the working life of the lift without the cost of a full replacement.
How regular lift maintenance helps prevent door faults
Because the doors are so heavily used, they are a key focus of routine maintenance. Door checks are normally part of a lift service visit, although the exact tasks vary with the lift type, how heavily it is used and the manufacturer’s maintenance requirements. Depending on the lift, they can include cleaning sill tracks, inspecting rollers, gibs and locks, checking door protection devices, and adjusting door operation where needed. This routine work helps keep the doors running smoothly and picks up wear and developing faults early, before they lead to a breakdown or costly repairs.
A planned preventative maintenance programme matched to how busy your lift is helps identify wear and developing faults, reducing the risk of door related breakdowns, although no programme can guarantee they will be prevented. A lift maintenance contract with the right visit frequency is the simplest way to put one in place and helps reduce avoidable faults and downtime. Building managers can help too:
- Keep landing areas clean, especially at ground floor entrances
- Protect doors during moves and deliveries, and use goods lifts for heavy items
- Discourage passengers from holding or forcing doors
- Report slow doors, unusual noises or doors that reopen as soon as they are noticed
For the wider picture of what causes lifts to fail, see our guide to why lifts break down.
Professional lift door repair from VM Elevators
VM Elevators repairs and maintains lift and elevator doors across London, Essex, the Home Counties and major cities throughout the UK. Our engineers diagnose the cause of the fault, repair it and provide a worksheet setting out what was found. To see what a maintenance contract covers, visit our lift maintenance services page.
If your lift doors are causing problems, visit our lift repair page or call 0800 448 8615. If your lift has stopped completely or someone is trapped, customers with a VM Elevators maintenance contract can use our 24/7 emergency callout service.